$150
Race Car Parts
TWM Ford 1600 Weber inlet manifold
Ford 1600 cross flow manifold for Weber DCOE carbs
Race Car Parts
Featured
$POR
$1,000
Race Car Parts
948 MG Midget/ AH Sprite SCCA Race Engines
SCCA National and Regional Race Motors that are disassembled. Complete engines for rebuild/assembly.
$2,450
$50
$175
$300
$350
Race Car Parts
Speedline flat profile rim halves
Speedline 14" rim halves for flat profile 3 pc wheels. New 115mm and 140mm
Featured
$4,950
Race Car Parts
Caterham 6 speed, New in Box
New Caterham 6 speed, ultraclose ratio transmission. NLA from Caterham.
Featured
$POR
Race Car Parts
Jaguar XJ220 Engine Parts - 8 Boxes
May also suit JV6 used in IMSA / Group C Jaguar XJR10, XJR10, XJR11, XJR16
$POR
Race Car Parts
Pre crossflow Intake manifolds and DCOE 18 Carb(s)
Original S2 Lotus pre crossflow intake manifolds plus DCOE 18 carbs.
Featured
$POR
Race Car Parts
Vegantune BDD all steel engine
Rare VeganTune BDD race engine, 3-bolt head. Rods and dry sump pan embossed with “VEGANTUNE”.
Featured
$POR
A$POR
Race Car Parts
Lotus Evora Rear subframe and wishbones
This is a new unused Evora engine subframe and a set of upper and lower wishbones.
$85
$295
Featured
$14,000
Race Car Parts
Honda Acura V6 engine race engine
Ex Spice 3.4 litre IMSA Camel Light prototype engine
$185
Featured
$8,500
Race Car Parts
Magnesium American Racing Torque Thrust D Wheels
4-Magnesium TTD Wheels from Kar Kraft 1969 Trans-Am Mustang
Featured
$12,000
Race Car Parts
AP 2279 Front & Rear Calipers
These were used on the AAR Dodge Challenger Trans-Am Race Cars, Can-Am and Indy Cars.
$24,000
Race Car Parts
Rare original complete Ford Cosworth steel block FVC engine.
Used in Europe with Chevron race car for the Super Sports Cup races from 1990 till 1995. Great strong reliable engine.See also above.
$8,500
$11,995
Race Car Parts
Includes many spare gear sets, and parts
This transmission was originally installed in a Soloma GT1 Corvette.
$1,900
$5,000
$16,000
$11,500
$10,000
$25,000
$40,000
$10,800
$6,200
Race Car Parts
Complete running Alexander 948 BMC
This engine and transmission was in my Lotus 11. I am changing to a Coventry climax engine. If you are restoring a 950 turner, or other vintage race car, this is a great chance for you to have a cross flow BMC in your racecar.
$8,700
$17,000
$16,500
$210,000
$695,000
$10,500
$4,000
$3,500
$350,000
$80,000
$60,000
Race Car Parts
This EV Enjine which is in a spledid state is the all over the world
There was a problem of low pressure,and it was removed in 42mil in 1990 by Leyton house.
$3,000
$1,500
Race Car Parts
Cosworth Vega 2.0L (EAA) engine for your unique project(s).
Wiki: Racing origin[edit] Known at Cosworth Engineering as Project EA, a Cosworth racing engine based on the Vega aluminum block produced a reported 260 hp (190 kW) and powered Chevron and Lola race cars to wins in the 2- liter class
$15,000
Race Car Parts
Professionally Built Drag Engine 381 ci
Ex-Tom Martino engine, originally run in the old Aussie pro-stock class as 325 ci.
$6,800
$45,000
$39,000
$30,000
Race Car Parts
Rare, one of only two 1946 Offy engines produced for Indy
In 1946 Lou Fagoel worked with Offy to develop two 90 c.i. engines for his Indy car. Paul Russo drove Fagoel's car, but crashed on the 17th lap. My father bought the engine from Fagoel in the late 1950s and ran it on the Bonneville Salt Flats a