Author: craig c May 12, 2008 at 14:13:16 from 76.189.91.90
Complete rear axel assembly for Lotus 7, replica, kit car, or other race car project. Absolutely ready to install, this housing is originally from a Nissan B210 sedan but has been modified so that it is a "bolt-in" for a Lotus 7 with absolutely no welding required. 53" total width from drum to drum makes it perfect for racing/solo/hot street applications, and there is a 4.55 ring and pinion and limited slip differential installed in the housing . It is COMPLETE with rear drums, brakes, drilled backing plates for extra cooling, and all brake lines. It also has hardened axels that have been re-drilled to the 3.75" standard Lotus bolt circle, and is complete with heavy-duty 1/2" rear wheel studs and lug nuts. The assembly also includes fully adjustable coilover rear shocks (and springs) and a custom rear sway bar set up and all related hardware. The housing has been straightened and strengthened and is set up for a stock Lotus lower "a-frame" assembly and upper trailing arms. $750 for everything listed above, not including shipping from Akron, Ohio. Craig Chima (330) 807-0742 or chima97@aol.com