Author: marchhare January 15, 2010 at 17:29:05 from 65.2.201.147
Looking for hose suitable to connect fuel cell outlet spigot to make-up tank. Needs to be 1" I.D. relatively thin wall and supple and capable of being secured over a beaded aluminum tube with a hose clamp. Obviously, must be fuel resistant. Earls Super Stock Hose looked good but not available in that 1" size.
Post Followup
Note: Follow-ups should only be used for information of interest to all viewers. For other inquiries or personal communication please send an email if possible or use other contact information provided.
When you return to the board you will need to do a REFRESH or RELOAD to see your followup.