Author: Jim Shields December 6, 2008 at 19:33:20 from 75.50.59.147 in reply to: Denzel Car / Engine posted by Joe on September 7, 2008 at 09:27:12
I am building a Denzel 1500 S, and made all the tooling to rebuild my Hirth roller crank. I am preparing the NOS 36 case now . What fun when you graduate from Okrasa to Denzel. Both are good, but the Denzel has captivated me. I bought my first Denzel from Cliff Crate in the early '70s, and my second Denzel from Frankie Freeman in 1989. It has taken me a while to get all of this geared up.
Post Followup
Note: Follow-ups should only be used for information of interest to all viewers. For other inquiries or personal communication please send an email if possible or use other contact information provided.
When you return to the board you will need to do a REFRESH or RELOAD to see your followup.