Author: Chris Wilson June 15, 2008 at 17:03:04 from 82.70.254.222
I have an alloy head casting I want to add an external oil drain to. It has a perfectly sited core plug of 30mm OD at the rear, into the bottom of the oil galleries. I have knocked this out, can anyone say what the nearest size Aeroquip type 90 degree male fitting is I can tap it out to use please? Thanks.
Post Followup
Note: Follow-ups should only be used for information of interest to all viewers. For other inquiries or personal communication please send an email if possible or use other contact information provided.
When you return to the board you will need to do a REFRESH or RELOAD to see your followup.