Author: Roger May 12, 2008 at 13:11:56 from 207.136.176.149 in reply to: Re: 711 M FF 1600cc Block posted by PF on May 10, 2008 at 16:30:36
Paul,
Look at the top of the block yourself and look in particular around some of the water passages and how thick the metal is around them. then imagine a 1/2 inch gone. Not sure you'd be able to drill & tap the head bolt holes that much deeper before you'd be in the wet.
Post Followup
Note: Follow-ups should only be used for information of interest to all viewers. For other inquiries or personal communication please send an email if possible or use other contact information provided.
When you return to the board you will need to do a REFRESH or RELOAD to see your followup.