Author: Erik Krueger February 13, 2008 at 22:45:38 from 76.189.93.49
I am writing to see if anyone can help me with parts for a Ford race engine. It is out of an older Bobsey Racer. I am working with a car museum and am trying to get it back in running condition. I was told that it was a Cosworth BDH engine (1300cc). After pulling the engine apart, I found that it is only about 840cc (77mm bore x 45mm stroke). It has "built by Brian Hart" on the valve cover. I found that this company is out of business. Today I found this stamped into the side of the crankcase "BDA 73399". I am thinking that someone made a smaller displacement engine out of the BDA block. It has a Lucas mechanical fuel injection system and a dry sump. It has Mahle pistons with the numbers 77P6 on the bottom.
I would like to buy a set of valve springs, gasket set, belts, etc. for this engine.
Can you provide these parts or help identify what the engine is?
Post Followup
Note: Follow-ups should only be used for information of interest to all viewers. For other inquiries or personal communication please send an email if possible or use other contact information provided.
When you return to the board you will need to do a REFRESH or RELOAD to see your followup.